HSE enforcement under review, could HSE cover offices, shops and small business?

HSEIn a move which we suspected might come to pass some years ago it has been announced that health and safety enforcement may change for smaller businesses.

During July 2016 the HSE ran a consultation on health and safety enforcement allocation.  Chiefly, it looked at the role of the local authorities.  A range of options were considered, ranging from completely absorbing the LAs’ regulatory powers for health and safety, to allocating them greater duties.

This is something which we discussed on our Breakfast Club sessions for clients and on this blog some years ago.  We believe that this is likely to come to pass and the reason will be to bring the lucrative Fee for Intervention (FFI) scheme into play for smaller businesses.

Passing the enforcement role to HSE from overworked EHO’s achieves three goals of the government as we see it;

  1. It eases the burden on councils at a time when their budgets are under stress from central government funding;
  2. It enables the introduction of Fee for Intervention (fee based enforcement) for the remainder of UK workplaces enabling it to reach smaller businesses and drive in additional revenue;
  3. The current situation for sectors such as the motor trade / motor vehicle repair are split untidily between HSE and the LA’s, this change would enable a simpler co-ordinated approach to this type of business which currently falls between HSE and FFI fines and the LA EHO’s and no FFI.

Likely timescales

So, when is this likely to happen?  Well, nothing in government moves quickly and so we won’t see any update on the consultation until 2017 with any changes happening in late 2017.  However, we do think a change is on the way and HSE are recruiting, watch this space…

Contact us on 01453 800 100 if you need expert help with health and safety for a fixed cost or request a call back.

Posted by Roger Hart

Construction pays HSE over £4m in fees under FFI

Despite HSE insisting that its Fee for Intervention (HSE FFI) scheme is HSEnot intended to plug the hole in its finances caused by the reduction of its government grant recent figures show a 13% decline in enforcement notices (improvement notices and prohibition notices).  At the same time a 26% increase in the charges made under FFI has been made against the construction sector with fees from April 2015 to March 2016 reaching a record £4.22m

Some may be rightly concerned whilst others may be grateful to avoid having an enforcement notice issued against their business and the subsequent need to admit this to their client base (as its presence in the HSE Hall of Shame).

Whatever your particular viewpoint it does show that Fee For Intervention is on the increase and that construction and contracting businesses are being targeted.  As you will probably be aware all FFI is ‘in the Inspectors opinion’ and so good practice is important and base legal compliance may not be enough to protect you from fines.

As always, if you need more advice please contact your retained consultant.

Notices of Contravention (HSE FFI)

HSE issue invoices following a written Notice of Contravention sent to duty holders regarding ‘material breaches’ of the law found by HSE inspectors, HSE invoice data for the last three full year invoice is as follows:

April 2013 – March 2014 – 6960 invoices issued with a total value of £2,545,474. The average value of invoices issued is £366.

April 2014 – March 2015 – 6075 invoices issued with a total value of £3,1116,234. This represents a 21% increase in the total value of invoices issued over the previous period. The average value of invoices issued is £513 representing a 29% increase.

April 2015 – March 2016 – 6990 invoices issued with a total value of £4,220,972. This represents a 26% increase in the total value of invoices issued over the previous period. The average value of invoices issued is £604 representing 15% increase.

Enforcement Notices (HSE FFI)

Over the same period which shows that the number of enforcement notices issued in the construction sector has fallen.

April 2013 – March 2014 – the database shows 3625 prohibition and improvement notices issued by HSE construction teams.

April 2014 – March 2015 – the database shows 3244 prohibition and improvement notices issued by HSE construction teams. This represents a 11% fall in the number of notices issued.

April 2015 – March 2016 – the database shows 2713 prohibition and improvement notices issued by HSE construction teams. This represents a 13% fall in the number of notices issued.

The data suggest that the HSE Notice of Contravention and consequent inspection fee forms an increasingly important mechanism for HSE in securing compliance and improved standards of health and safety in the construction sector.

This is occurring at a time when use of formal Enforcement Notices (improvement and prohibition) is declining in the sector.

Posted by Roger Hart

HSE Fee For Intervention has been served on an individual worker

HSEWith almost 12 months elapsed since the introduction of Fee For Intervention (FFI) we have heard for the first time of an individual being fined under the scheme.

The individual was employed as a scaffolder working on a Carey Housing project.  The HSE Inspector was driving by the site when he noticed the scaffolder working without edge protection, or any other method that might prevent him from failing.

The Inspector spoke directly to the scaffolder and explaining what he had observed regarding the material breach which the scaffolder had made. The result was that the scaffolder was personally issued with an Enforcement Notice and fined £400.

The Project Manager was next to be interviewed and discussions took place with regard to the role of the Principle Contractor under CDM, training requirements, competency, safe systems ofwork (including review of the sub-contractor’s method statements and risk assessments).

Perhaps not surprisingly the Inspector’s opinion was that the method statement submitted needed to be made more site specific. The detail which was omitted was the method of protection the scaffolder would be using — this should not be “generic” or left entirely to the scaffolder to decide upon but specified in writing.

No action taken against Careys, as the Principal Contractor, on this occasion, as the Inspector was, in general, pleased with what he had seen at site. However, the Inspector warned that individuals are being targeted and will continue to receive fines and an Enforcement Notice from the HSE if they break the law.

Examples of material breaches could include but are not limited to; failing to wear PPE, operating plant and equipment without the relevant training, failing to adhere to the method statement and risk assessments (RAMs), or for altering scaffolds if you are not trained.

The lesson?  Use your RAMS as working documents – this is how our documents have always been produced.  If you need help updating your own please call us for a clear and competitive cost.

About: Roger Hart  is Managing Director of Outsource Safety Ltd, a consultancy specialising in ISO9001, ISO14001 and OHSAS18001 Management Systems.  The company employs 10 staff and works for hundreds of retained clients across the UK in all sectors from Defence and Aerospace to Education and Museums with a specialism in the contracting, construction and renewables sectors, www.outsource-safety.co.uk


Posted by Roger Hart

Commonly used abbreviations in health and safety and their meaning

Commonly used Health and Safety abbreviations

Use the underlined links below to find areas of our site where related services can be offered.  If you have questions please call us on 01453 800100 to speak to an experienced safety consultant.

  1. These are common terms used by health and safety professionals and enforcement agencies such as the Health and Safety Executive (HSE) and Health and Safety Commission (HSC)
  2. ACOP Approved Code of Practice
  3. ACM Asbestos Containing Materials
  4. BMA British Medical Association
  5. BOHS British Occupational Hygiene Society
  6. BSI British Standards Institute
  7. BTS British Toxicology Society
  8. C(WP) Construction (Work Place) Regulations
  9. CBI Confederation of British Industry
  10. CDG The Carriage of Dangerous Goods by Road Regulations, see also Dangerous Goods Safety Advisor
  11. CDM Construction (Design & Management) Regulations
  12. CDMC CDM Coordinator (see guidance section and construction safety consultancy section)
  13. CE The letters “CE” do not represent any specific words but the mark a declaration by the manufacturer, indicating that the product satisfies all relevant European Directives. Note, however, that the mark only applies to products that fall within the scope of European Directives.
  14. CFC Chlorofluorocarbons
  15. CFM Cubic Feet per Minute Amount of air flowing through a given space in one minute 1 CFM approximately equals 2 litres per second
  16. CHAS The Contractors Health and Safety Assessment Scheme
  17. CHIP Chemical Hazards Information and Packaging
  18. CO Carbon Monoxide
  19. CO2 Carbon Dioxide
  20. COMAH Control of Major Accident Hazards Regulations
  21. COSHH Control of Substances Hazardous to Health Regulations
  22. COSHH RA COSHH Risk Assessment
  23. CPHSP Construction Phase Health & Safety Plan (CDM Regulations / CDM Coordinator)
  24. CNS Central Nervous System
  25. CRT Cathode Ray Tube
  26. CSSA Construction Site Safety Audit
  27. CTS Carpal Tunnel Syndrome
  28. CVD Cardiovascular Disease
  29. dB Decibel, see also Noise Consultancy
  30. DDA Disability Discrimination Act
  31. DGSA Dangerous Goods Safety Advisor
  32. DSE Display Screen Equipment, see also Display Screen Equipment Risk Assessment
  33. EA Environmental Agency, see also Environmental Consultancy and ISO14001
  34. EAW Electricity at Work Regulations
  35. EHO Environmental Health Officer
  36. EMAS Eco-Management and Audit Scheme, see also Environmental Consultancy and ISO14001
  37. EMAS Employment Medical Advisory Service
  38. FA Factories Act
  39. FH(G) Food Hygiene (General) Regulations
  40. FLT Fork Lift Truck, see also Skills Training
  41. FPA Fire Precautions Act
  42. FPWR Fire Precautions (Workplace) Regulations, see also Fire Risk Assessment
  43. GMC General Medical Council
  44. GP General Practitioner
  45. H&S Health & Safety
  46. HASWA Health & Safety at Work Act
  47. HAZCHEM Hazardous Chemical Warning Signs
  48. HR Human Resources
  49. HSC Health & Safety Commission
  50. HSCON Health & Safety Consultant
  51. HSDSER Health & Safety (Display Screen Equipment) Regulations
  52. HSE Health & Safety Executive
  53. HSP Health & Safety Policy
  54. IAQ Indoor Air Quality
  55. ICOH International Commission on Occupational Health
  56. IOD Institute of Directors
  57. IOSH Institution of Occupational Safety & Health
  58. LOLER Lifting Operations and Lifting Equipment Regulations
  59. LPG Liquid Petroleum Gas
  60. MAPP Major Accident Prevention Policy
  61. MEL Maximum Exposure Limit, see also COSHH Risk Assessment
  62. mg.m3 Milligrams per cubic metre, see also COSHH Risk Assessment
  63. MHOR Manual Handling Operation Regulations
  64. MHSWR Management of Health & Safety at Work Regulations
  65. MSD Musculoskeletal Disorder
  66. MSDS Material Data Safety Sheet, see also COSHH Risk Assessment
  67. NAWR Noise at Work Regulations
  68. NEBOSH National Examination Board of Occupational Safety and Health
  69. NHS National Health Service
  70. NIHL Noise Induced Hearing Loss
  71. OHAC Occupational Health Advisory Committee of The Health & Safety Commission
  72. OHSAS18001 BSI Standard for Occupational Health & Safety
  73. OSRPA Offices Shops & Railway Premises Act
  74. PAT Portable Appliance Test
  75. PPE Personal Protective Equipment
  76. PPEWR Personal Protective Equipment at Work Regulations
  77. ppb Parts Per Billion, see also COSHH Risk Assessment
  78. ppm Parts Per Million, see also COSHH Risk Assessment
  79. PUWER Provision & Use of Work Equipment Regulations
  80. QA/QC Quality Assurance/Quality Control
  81. RAMS Risk Assessment and Method Statement
  82. RCD Residual Current Device
  83. RIDDOR Reporting of Injuries, Disease & Dangerous Occurrences Regulations
  84. RoSPA Royal Society for the Prevention of Accidents
  85. RSA Regional Speciality Adviser
  86. RSA Royal Society of Arts (training accreditation)
  87. RSI Repetitive Strain Injury
  88. SBS Sick Building Syndrome, see also Indoor Air Quality
  89. SCon Safety Consultants, see also Health & Safety Consultant
  90. SMAS – Safety Management Advisory Services
  91. SSIP – Safety Schemes in Procurement
  92. TUC Trades Union Congress
  93. Type 2 Survey Asbestos Survey defined under MDHS 100 (types 1 and 3 also defined), see Asbestos Surveys
  94. VDU Visual Display Unit
  95. WEL Workplace Exposure Limit (COSHH Risk Assessment)
  96. WHO World Health Organisation
  97. WHSWR Workplace (Health Safety & Welfare) Regulations
  98. WRULD Work Related Upper Limb Disorder
Posted by Roger Hart

British Standards relating to health and safety

Summary of common British Standards used in Health and Safety


  • BS EN 397: Specification for industrial safety helmets.
  • BS EN 812: Specification for industrial bump caps.


  • BS EN 166: Specification for personal eye protection.
  • BS EN 169: Specification for filters used in eye protection for welding etc (braze-welding, arc gouging and plasma jet cutting)
  • BS EN 170: Specification for Ultra Violet filters.
  • BS EN 171: Specification for infrared filters.
  • BS EN 172: Specification for sun-glare filters.
  • prEN 175: Equipment for eye & face protection during welding/allied processes.
  • BS EN 207: Specification for laser radiation filters.
  • BS EN 379: Specification for filters (switchable or dual luminous) used in welding etc.
  • prEN 1731: Mesh type eye/face protectors against mechanical hazards & heat.


  • BS EN 352-1: Specification for earmuffs.
  • BS EN 352-2: Specification for earplugs.
  • prEN 352-3: Specification for earmuffs attached to safety helmets.
  • prEN 352-4: Specification for level-dependent earmuffs.
  • BS EN 458: Selection, use, care & maintenance of hearing protectors.


  • BS EN 136: Full face masks.
  • BS EN 137: Self-contained open-circuit compressed air.
  • BS EN 138: Fresh air hose & mask/mouthpiece.
  • BS EN 139: Compressed air line & mask/mouthpiece.
  • BS EN 140: Half masks & quarter masks.
  • BS EN 141: Gas filters & combined filters.
  • BS EN 143: Particle filters.
  • BS EN 145: Self-contained closed-circuit breathing.
  • BS EN 146: Powered particle filtering devices (including hoods or helmets).
  • BS EN 147: Powered particle filtering devices (including masks).
  • BS EN 149: Filtering half-masks against particles.
  • BS EN 270: Compressed air line & hood.
  • BS EN 271: Compressed air line or powered air hose & hood (abrasive blasting).
  • BS EN 371: AX gas filters (against low boiling organic compounds).
  • BS EN 372: SX gas & combined filters (against specific compounds).


  • BS EN 374: Protective gloves against chemicals/ microorganisms.
  • prEN 381-7: Protective gloves for chainsaws.
  • BS EN 388: Protective gloves against mechanical risks (abrasion, cutting, etc).
  • BS EN 407: Protective gloves against thermal risk (heat &/or fire).
  • BS EN 420: General requirements for gloves.
  • BS EN 421: Protective gloves against ionising radiation/radioactive contamination.
  • BS EN 511: Protective gloves against cold.
  • BS EN 659: Protective gloves for fire fighters.
  • prEN 1082: Protective gloves against cuts by hand knives.
  • prEN 12477: Protective gloves for welders.


  • BS ENV 342:Protection against cold (more than -5°C).
  • BS ENV 343: Protection against foul weather.
  • BS EN 381: Protection for users of hand-held chainsaws.
  • BS EN 412: Protection aprons against hand knives.
  • BS EN 471: Protection against low-visibility hazards.
  • BS EN 510: Protection against entanglement in moving parts.
  • BS EN 1073-1: Protection against radioactive contamination.
  • BS EN 1149-1: Protection against electrostatic discharge to avoid incendiary.


  • BS EN 469:Protection for fire fighters.
  • BS EN 470-1: Protection clothing for use in welding, grinding and cutting.
  • BS EN 531: Protection clothing for industrial workers exposed to heat (includes molten metal splash in foundries –
  • levels D (Alum) & E (Iron).
  • BS EN 533: Protection against limited flame spread – limited materials.
  • BS EN 1486: Fire-fighting specialised clothing.


  • BS EN 465: Liquid chemicals (spray-tight) Type 4 equipment.
  • BS EN 466: Liquid chemicals (liquid-tight) Type 3 equipment.
  • BS EN 467: Liquid chemicals (partial body e.g.. Apron, sleeves & hoods).
  • prEN 943-1: Liquid and gaseous chemicals Type 1 (gas-tight) + Type 2 (non gas-tight).
  • prEN 1511: Liquid chemicals for limited life/use (liquid-tight) Type 3 equipment.
  • prEN 1512: Liquid chemicals for limited life/use (spray-tight) Type 4 equipment.
  • prEN 1513: Liquid chemicals for limited life/use (partial body).
  • prEN 13034: Liquid chemicals for limited performance/re-usable Type 6.
  • prEN 13982-2: Partial-tight limited life/re-usable Type 5.


  • BS EN 344-1:Requirements & tests methods for safety footwear.
  • BS EN 344-2: Additional requirements for protection against water, cut resistance & metatarsal protection
  • BS EN 345-1: Additional requirements for protection against IMPACT at 200J.
  • BS EN 345-2: Additional requirements for protection against water, cut resistance & metatarsal protection.
  • BS EN 346-1: Additional requirements for protection against IMPACT at 100J.
  • BS EN 346-2: Additional requirements for protection against water, cut resistance & metatarsal protection.
  • BS EN 347-1: Occupational footwear without safety toecaps.
  • BS EN 347-2: Additional requirements for protection against water.
  • BS EN 381: Protection against hand-held chain saws
  • prEN 13287: Slip resistance specifications.

Full Listing

Access equipment BS 6037
Acoustic measurement/machine tools BS 4813
Agricultural machinery: combine and forage harvesters BS EN 632
Agricultural machinery: silage cutters BS EN 703
Airborne noise emission
– earth-moving machinery BS 6812
– hydraulic transmission systems BS 5944
– portable chain saws BS 6916
Ambient air: determination of asbestos fibres – direct-transfer transmission electron microscopy method BS ISO 10312
– industrial safety harnesses BS EN 795
– self-locking, industrial BS EN 353, 355, 360, 362, 365
Arc welding equipment BS 638
Artificial daylight lamps
– colour assessment BS 950
– for sensitometry BS 1380
Artificial lighting BS 8206
Barriers, in and about buildings BS 6180
– fire extinguishing systems BS 5306
– fire extinguishers BS 6535
Carbon steel welded horizontal
– cylindrical storage tanks BS 2594
Carpet cleaners, electric, industrial use BS 5415
Cellulose fibres BS 1771
Chain lever hoists BS 4898
Chain pulley blocks, hand-operated BS 3243
Chain slings
– alloy steel BS 3458
– high tensile steel BS 2902
– steel use and maintenance BS 6968
– welded BS 6304
– adjustable office furniture BS 5459
– office furniture, design/dimensions BS 5940
– office furniture, ergonomic design BS 3044
Chemical protective clothing
– against gases and vapours pr EN 464
– liquid chemicals pr EN 463, 465, 466, 467, 468
Circular saws
– hand-held electric BS 2769
– safeguarding BS 6854
– woodworking BS 411
Cleaning and surface repair of buildings BS 6270
Closed circuit escape breathing apparatus BS 4667
Clothing for protection against intense heat BS EN 366, 367
Concrete cladding BS 8297
Construction equipment
– hoists BS 7212
– suspended safety chairs, cradles BS 2830
Control of noise (construction and open sites) BS 5228
Cranes, safe use BS 5744, 7121
Disabled people, means of escape BS 5588
Drill Rigs BS EN 791
– high efficiency respirators BS 7355, BS EN 143
– particulate emission BS 3405
– particulate emission, high accuracy BS 893
Ear protectors, sound attenuation measurement BS EN 24689–1
– audiometry, calibration, acoustic couplers BS 4668
– audiometry, calibration ears BS 4669
Earthing BS 7430
Earth moving equipment BS 6912
Electrical equipment
– explosive atmospheres BS 4683, 5501, 5345, 6941
– fire hazard testing BS 6458
– guidance to wiring regulations BS 7671
– impedance measurement BS 6161
Electrical resistance materials
– bare fine resistance wires BS 1117
– conductor sizes, low-voltage industrial switchgear and controlgear BS EN 60947–1
– double electrical insulation BS 2754
– earth-leakage circuit-breakers
— AC voltage operated BS 842
— current-operated BS 4293
— portable RCDs BS 7071
– electric shock protection, construction of electrical equipment BS 2754
– enclosures for high-voltage cable terminations, transformers and reactors BS 6435
– fans, industrial BS 848
– industrial electric plugs BS 4343
– industrial machines BS 2771
– marking for low-voltage industrial switchgear/controlgear BS 6272
– metallic BS 115
– resistivity measurement BS 5714
– static electricity BS 5958
– switchgear BS 5486–1, 5227, 7354
– test for resistance per unit length BS 3466
Emergency exits BS 5725
Emergency lighting BS 5266
Environmental management systems BS 7750
Ergonomics of the thermal environment BS ISO 9920
Ergonomic requirements for office work with VDUs BS EN 29241
Eye protection
– equipment for eye, face and neck protection against non-ionising radiation during welding operations BS 1542
– glossary of terms BS EN 165
– specification for sunglaze filters used in personal eye protectors for industrial use BS EN 172
Eye protectors BS EN 166, 167, 168
Fabrics, curtains and drapes BS 5867
Falling-object protective structures BS 6912–7
Falsework, code of practice BS 5975
Filters – specification for infra-red filters used in personal eye protection equipment BS EN 171
– specification for personal eye protection equipment in welding BS EN 169
– specification for ultra-violet filters used in personal eye protection equipment BS EN 170
Fire blankets BS 6575
Fire classification BS EN 2
Fire detection/alarm systems BS 5839
Fire detection/alarm systems – design, installation and servicing of integrated systems BS 7807
Fire door assemblies BS 8214
Fire extinguishers
– disposable aerosol type BS 6165
– media BS 6535
– on premises BS 5306
– portable BS EN 3, BS 7863
– portable, recharging BS 6643
Fire hose reels (water) BS EN 671–1
Fire point determination, petroleum products
– Cleveland open cup method BS EN 22592
– Pensky-Martens apparatus method BS 2000(35)
Fire precautions in design/construction of buildings BS 5588
Fire protection measures, code of practice for operation BS 7273
Fire safety signs BS 5499
Fire terms BS 4422 Pt 4
Fire tests BS 476
Fire tests for furniture BS 5852
Firefighters gloves pr EN 659
First-aid reel/hoses BS 3169
Flameproof industrial clothing BS EN 469, 531
Flammability testing and performance BS 6249
Flammable liquids BS 476
– footwear with midsole protection BS EN 347
– general and industrialised lined or unlined boots BS 6159 Pt 1
– lined industrialised vulcanised rubber boots BS 5145
– lined rubber safety boots BS EN 345, 346
– methods of test for safety BS EN 344
– other than all rubber and plastic moulded compounds BS EN 345, 346
– polyvinyl chloride boots BS 6159
– protective clothing for users of hand-held chain saws pr EN 381
PVC moulded safety footwear BS EN 345, 346
– requirements/test methods for safety protective and occupational footwear for professional use pr EN 344
– specification for safety footwear for professional use pr EN 347
– women’s protective footwear BS EN 346
Freight containers BS 3951
Gaiters and footwear for protection against burns and impact risks in foundries BS 4676
Gas detector tubes BS 5343
Gas fired hot water boilers BS 6798
Gas welding equipment BS EN 731
Glazing BS 6262
Gloves: medical gloves for single use BS EN 455
Gloves: rubber gloves for electrical purposes BS 697
Goggles, industrial/non-industrial use BS EN 166, 167, 168
Grinding machines
– hand-held electric BS 2769
– pneumatic, portable BS 4390
– spindle noses BS 1089
Head protection — fire fighters BS 3864
Headforms for use in testing protective helmets BS EN 960
Hearing protectors BS EN 352
– Part 1 Ear Muffs
– Part 2 Ear Plugs
High visibility warning clothing pr EN 471
Hoisting slings BS 6166
– alloy steel, chain BS 3458
– chain, welded BS 6304
– high tensile, steel chain BS 2902
– textile BS 6668
– wire rope BS 1290
– construction, safe use BS 7212
– electric, passenger/materials BS 4465
– working platforms BS 7171
Hose reels with semi-rigid hose BS EN 671-1
Hose systems with lay-flat hose cloth for fixed fire fighting systems BS EN 671-2
Hot environments
– estimation of heat stress on the working man BS EN 27243
Household and similar electrical appliances BS EN 60335
Industrial gloves BS EN 374, 388, 407, 420
Industrial safety helmets, firemen’s BS 3864
Industrial trucks
– hand-operated stillage trucks, dimensions BS 4337
– pallet trucks, dimensions BS ISO 509
– pedals, construction/layout BS 7178
Insulating material BS 7737, BS 7831, BS 5626, BS EN 26874, BS EN 60383-2, BS 7822, BS 2844, BS 5691
Ionising radiation
– exposure rate calculation BS 4094
– units of measurement BS 5775
Jib cranes
– high pedestal and portal BS 2452
– power-driven, mobile BS 1757
– code of practice BS 5395
– permanent for chimneys, high structures BS 4211
– portable aluminium BS 2037
– portable timber BS 1129
Lamps, artificial daylight, for colour assessment BS 950
Life jackets BS 394, 396
Lifting chains
– alloy, steel BS 3113
– high tensile steel BS 1663
– safe working on lifts BS 7255
Lighting systems: automatic change-over contractors for emergency lighting BS 764
Machine guards
– chain saws BS 6916
– conveyors and elevators BS 5667
– earth-moving equipment BS EN ISO 3457
– woodworking machines BS 6854
Machine tools
– emergency stop equipment, functional aspects BS EN 418
– noise measurement methods BS 4813
– safeguarding BS 5304 Machinery, safety of – drafting and presentation BS EN 414
– ergonomic design principles BS EN 614-1
– hazardous substances emitted by machines BS EN 626
– indication, marking and actuation requirements for visual, auditory and tactile signals BS EN 61310-1
– requirements for marking BS EN 61310-2
– minimum gaps to avoid crushing parts of body BS EN 349
– principles and specifications for machinery manufacturers BS EN 626-1
Machines, vibration BS 4675
Materials handling
– conveyor belts BS 5767
– freight containers BS 3951
Mobile cranes BS 1757
Mobile road construction machinery BS EN 500
Mortising machines, single chain BS 4361
Natural fibre ropes BS EN 698, 701, 1261
– cords, lines, twines BS 6125
Nets, safety BS 3913
– code of practice for use of safety nets, containment nets and sheets on construction sites BS 8093
– airborne, chain saws BS 6916
– airborne, earth-moving equipment BS 6812
– airborne, hydraulic transmission systems BS 5944
– effects on hearing handicap BS 5330
– industrial noise, method for rating BS 4142
– industrial premises, measurement BS 4142
– machine tools, measurement methods BS 4813
– sound exposure meters BS EN 61252
Noise induced hearing loss
– effects of noise exposure BS 5330
– pure tone air conduction threshold audiometry BS 6655
Occupational safety and health management systems BS 8800
Office buildings, fire precautions BS 5588
Office furniture, design/dimensions BS 5940
Office machines
– electrically energised, safety BS EN 60950, BS 7002
– keyboards, control keys BS ISO/IEC 9995 (1–8)
– noise measurement BS 7135
Oil burning equipment BS 799
Oil firing BS 5410
Open bar gratings – specification BS 4592 – Part I
Overhead travelling cranes – power-driven BS 466
– safe use BS 5744
– pictorial marking for handling of goods BS EN 20780
Particulate air pollutants
– in effluent gases, measurement BS 3405
– in effluent gases, measurement, high accuracy BS 893
Passenger hoists
– electric, building sites BS 4465
– vehicular BS 6109
– working platforms, mobile, elevating BS 7171
Patent glazing BS 5516
Pedestrian guardrails (metal) BS 7818
Performance of windows BS 6375
Personal eye protection
– filters for welding and related techniques BS EN 169
– infrared filters BS EN 171
– non-optical test methods pr EN 168
– optical test methods pr EN 167
– specifications pr EN 166
– ultraviolet filters BS EN 170
– vocabulary pr EN 165
Pipelines, identification marking BS 1710, 4800
Pneumatic tools
– portable grinding machines BS 4390
Portable fire extinguishers BS EN 3, BS 7863
Portable tools
– electric, radio interference limits and measurements BS EN 55014
– pneumatic grinding machines BS 4390
Powder fire extinguishers
– disposable, aerosol type BS 6165
– extinguishing powders for BS EN 615
– on premises BS 5306
– portable, recharging BS 6643
Power take-off
– agricultural tractors, front-mounted BS 6818
– agricultural tractors, rear-mounted BS 5861
Powered industrial trucks
– controls, symbols BS 5829
– high-lift rider trucks, overhead guards BS 5933
Pressure vessels BS 5500
Process control – safety of analyser houses BS EN 61285
Protective barriers BS 6180
Protective cabs
– controls for external equipment BS 5731
Protective clothing
– against cold weather pr EN 342
– against foul weather pr EN 343
– against heat and fire BS EN 366
– against heat and flame BS EN 702
– against heat and flame – test method for limited flame spread BS EN 532
– against molten metal splash BS EN 373
– against risk of being caught up in moving parts BS EN 510
– eye, face and neck protection, welding BS 1542
– flameproof BS EN 469, 531
– for firefighters BS EN 469
– for industrial workers exposed to heat BS EN 531
– for use where there is risk of entanglement BS EN 510
– for users of hand-held chain saws BS EN 381
– for welders BS EN 470
– for workers exposed to heat BS EN 531
– gaiters for foundries BS 4676
– general requirements BS EN 340
– mechanical properties BS EN 863
– protection against heat and fire BS EN 366
– protection against intense heat BS EN 366, 367
– protection against liquid chemicals BS EN 369, 466, 467
– welding BS EN 470–1
Protective equipment
– against falls from a height BS EN 341
– against falls from a height – guided fall type arresters BS EN 353
Protective footwear
– antistatic rubber BS 5145, 7193
– firemen’s leather boots BS 2723
– for foundries BS 4676
– lined industrialised rubber boots BS 5145
– polyvinyl chloride boots BS 6159
– women’s BS EN 346
Protective gloves
– against chemicals and micro-organisms BS EN 374
– against cold BS EN 511
– against ionising radiation BS EN 421
– against mechanical risks BS EN 388
– against thermal hazards BS EN 407
– for users of hand-held chain saws BS EN 381
– general requirements BS EN 420
– mechanical test methods BS EN 388
Protective helmets BS EN 397
Quality control BS 5750
Radiation measures
– detectors, nuclear reactors BS 5548
– electroscope, exposure meters BS 3385
– film badges BS 3664
– neutron detectors BS 5552
– personal photographic dosimeters BS 6090
Radiation protection
– area radiation monitors, X-ray and gamma radiation BS 5566
Refrigeration systems BS 4434
Resistance to ignition of upholstered furniture
– for non-domestic seating BS 7176
– full masks for respiratory protective devices BS 7355
– half and quarter face masks for respiratory protective devices BS 7356
– high-efficiency dust respirators BS 7355, BS EN 143
– positive pressure dust hoods and blouses BS EN 143, 146
– positive pressure dust respirators BS 7355, BS EN 143, 147
Respiratory protective devices BS EN 138, 139, 269, 270, 271
Roll-over protective structures
– industrial trucks, stacking with masted tilt forward BS 5778
– pallet stackers/high lift platform trucks BS 5777
– reach and straddle fork trucks BS 4436
Rope pulley blocks
– gin blocks BS 1692
– synthetic fibre BS 4344
– wire, heavy duty BS 4536
Rope slings
– fibre rope slings BS 6668
– wire rope slings BS 1290, 6210
Rubber/plastics injection moulding machines BS 6679
Safety anchorages
– industrial safety harnesses BS EN 795
Safety distances to prevent danger zones being reached by upper limbs BS EN 294
Safety harnesses
– industrial BS EN 354, 355, 358, 361–365
– industrial, manually operated positioning devices BS 6858
Safety helmets BS EN 397
Sampling methods
– airborne radioactive materials BS 5243
– particulate emissions BS 3405
Scaffolds, code of practice BS 5973, 5974
Scalp protectors BS 4033
Shaft construction and descent BS 8008
Sound insulation in buildings BS EN ISO 140
– lightweight portable timber BS 1129
– portable aluminium alloy BS 2037
Stairs, ladders, walkways BS 5395
Steam boilers
– electric boilers BS 1894
– safety valves for BS 6759
– welded steel low pressure boilers BS 855
Step ladders
– portable aluminium alloy BS 2037
– portable timber BS 1129
Storage tanks
– carbon steel welded horizontal cylindrical BS 2594
– vertical steel welded non-refrigerated butt-welded shells BS 2654
Suspended access equipment, permanently installed BS 6037
Suspended safety chairs BS 2830
Suspended scaffolds, temporarily installed BS 5974
Tables, office furniture, ergonomic design BS 3044
Textile floor coverings BS 5287
Textile machinery, safety requirements BS EN ISO 11111
Transportable gas containers
– acetylene containers BS 6071
– periodic inspection, testing and maintenance BS 5430
– welded steel tanks for road transport of liquefiable gases BS 7122
Travelling cranes, power-driven jib BS 357, 5744
Vertical steel welded non-refrigerated storage tanks, manufacture of BS 2654
Vibration measurement
– chain saws BS 6916
– rotating shafts BS ISO 7919–1
Visual display terminals, ergonomics and design BS 7179
Water absorption and translucency of china or porcelain BS 5416
Water services, installation, testing and maintenance BS 6700
Welders, protective clothing BS EN 470–1
Window cleaning BS 8213
Windows, performance of BS 6375
Woodworking machines BS 6854
Woodworking noise BS 7140
Wool and wool blends BS 1771
Working platforms
– mobile, elevating BS 7171
– permanent, suspended access BS 6037
Workplace atmospheres
– performance of procedures for measurement of chemical agents BS EN 482
– size definitions for measurement of airborne particulates BS EN 481
Workwear and career wear BS 5426

Posted by Roger Hart