Tag Archives: Outsourced Safety

Client fails to appoint a Principal Contractor and receives £200,000 fine

The Construction (Design and Management) Regulations are long established having been first issued in 1994 but more recent changes in the 2015 update are catching out some clients.  We think that as time progresses HSE will be looking to enforce more regularly on client duties in project both large and small.

The case below will highlight the potential for clients to become liable when they don’t take steps to ensure their own compliance under CDM.  If you have questions or need CDM 2015 support please contact us and speak to one of our CDM experts on 01453 800100.

Failure by client to appoint attracts PC duties by default

The owner of block of flats has been prosecuted and fined £200,000 after HSE identified serious safety breaches during demolition of the building in South London.

As is often typical a member of the public was the first to raise the alarm and it was found that the building owner and client had failed to make any appointments under CDM 2015.  Without this is place te duties associated with the Principal Designer and Principal Contractor roles would fall to the client – something which is known to us but was most likely an unpleasant surprise for Mr Selliah Sivguru Sivaneswaran.

In October 2016 HSE Inspectors stopped work at site die to workers being exposed to a range of risks including asbestos, falls from height, and fire. When HSE revisited the site for a second time in January 2017 work had restarted whilst the site was still unsafe – despite enforcement notices being served and advice being provided.

The demolition work continued to be carried out by hand with workers climbing onto unguarded roof and bombing the debris to the ground. Workers were at risk of falling up to 4m through unguarded openings in the floors and the partly demolished staircase.

Welfare facilities were not provided and there was a significant risk of fire without adequate means of escape. The Court heard that two days before the sentencing hearing HSE had to return to the site and take further action.

The Court heard that despite the foreseeably large financial return from the project, Mr Sivaneswaran put profit before safety and paid cash in hand to untrained workers, failed to engage a site manager, and provided none of the legally-required site documentation.

Mr. Sivaneswaran pleaded guilty to breaching Regulation 13(1) and 4(1) of the Construction (Design and Management) Regulations 2015 (CDM) and was fined £200,000 and ordered to pay £1,421.20 in costs.

HSE inspector Andrew Verrall-Withers commented after the hearing:

“Mr. Sivaneswaran was a commercial client as he was carrying out work as part of a business. When he failed to appoint a Principal Contractor (PC) the the PC duties fell to him.

Thanks to a member of the public reporting the dangerous conditions HSE was able to take action. It was just good fortune that no one had been killed at the site.

Instead of taking the support and advice provided by HSE, Mr. Sivaneswaran continued to let the workers operate in appalling conditions where they were at risk of being killed. He did not even provide a WC or washing facilities”.

Contact form

Please complete the form below and we promise to respond within 24 hrs. If you need more urgent help just call 01453 800109 and ask for Andrea.

Bristol Construction firm receives £145,000 fine without an incident occurring

There are two common misconceptions to be addressed here;

  1. You have to have an accident to get prosecuted and fined by the HSE;
  2. Most inspections come through random HSE visits.

This case disproves both of these assumptions.  Firstly, the case was prosecuted based on the risk of the breach rather than based on any accident or incident which occurred.  Secondly, the visit was prompted by the concerns of a member of the public communicated to HSE through their website which can be accessed here; HSE: raise a concern

Ikon construction had received previous warnings relating to the correct planning and management of construction work but these had not been acted upon.  The fine related to risk without injury during the construction of nine timber framed town houses and resulted in a significant fine of £145,000 plus £2191.20 in costs.

Speaking after the hearing, HSE Inspector Kate Leftly said:

“By failing to comply with the law, Ikon Construction endangered the lives of workers at the site, and neighbouring residents of the complex being developed.

Thankfully, a complaint was made by the public which we acted on very quickly and subsequently thoroughly investigated.”

If you need help, advice and support on any aspect of construction site safety or application of the CDM Regulations as a Designer, Contractor or Principal Contractor please contact us using the links above and below to see how we can help.

Contact form

Please complete the form below and we promise to respond within 24 hrs. If you need more urgent help just call 01453 800109 and ask for Andrea.

Time, not material goods, ‘raises happiness’

Bear with us for a moment or two… this is relevant to a blog on health and safety but it might take a couple of paragraphs to demonstrate how.

I read this whilst I was recently on holiday and so had some free time in which to think a little on the content.  Its an interesting article in its own right but it also has a wider message for us all in the way in which we approach our work and home lives.

Its hard to get away from the material side of wanting things, televisions, conservatories and new kitchens, new cars or from a work perspective, more turnover, more profit, higher wages and perhaps a big pension.

One thing which you might not at first consider is the innate value of time – your time.  Perhaps you’re a manager who would benefit from losing time to safety tasks in order to concentrate on what you’re best at.  Perhaps you’re a business owner who could find more enthusiasm for their company if you could be savedfrom dealing with all that red tape….

Whatever your personal circumstances, at work and at home think about time.  We all have a finite amount of it and making your life as happy an experience as possible will make you a better boss, wife, husband, employee, person.

Take the time to find make more time for the things you love to do and get another person to carry out those tasks which you don’t like… perhaps starting with health and safety.

Time, not material goods, ‘raises happiness’
http://www.bbc.com/news/science-environment-40703519

Contact form

Please complete the form below and we promise to respond within 24 hrs. If you need more urgent help just call 01453 800109 and ask for Andrea.

Welding of drums or other vessels – the potential for explosion

Lots of businesses which we visit have an oil drum or two lying around the workplace.  It may seems like a good idea to make use of one of these unwanted items and we’ve seen them made into bins and even barbecues.

However, depending on what used to be inside them cutting them open or welding something onto them can result in a powerful explosion.  If you want some more information of what we mean by this take a look at the video from WorkSafeBC; Drum Explodes During Welding, Killing Worker

The problem in this instance was that the original substance, acetone, a solvent used in the manufacture of fiberglass items and many other productions, remained in the vessel. Even a trace amount after the drum was washed through could still be present in sufficient quantity to create an explosive atmosphere. in the case of the video above this was less than a tea spoonful of the original acetone.

Looking at the safety aspects here you can see how likely it is that vapours will remain, even after washing out a drum.  Add into that the heat generated by cutting, grinding or welding the drum allowing the remaining substance to ‘gas off’ and you have a potential bomb on your hands.

The best route to reducing risk is to avoid this situation altogether but sometimes people do need to work in situations where welding will need to take place.  If you can’t avoid it then make yourself familiar with the best practices to reduce risk.

For more information please have a read through the free HSE guidance on the subject here;  Hot work on small tanks and drums INDG314(rev1)

Most importantly, consider if you really need to do this.  Replacing rather than repairing may be your better option.  If you do need to make repairs don’t forget that cold cutting or cold repair techniques may also be an option and will avoid the key risk of hot works and potential explosions.

As always, if you need advice then please call us quoting your Safety~net membership number or company name and we’ll be pleased to offer some more specific advice.

Contact form

Please complete the form below and we promise to respond within 24 hrs. If you need more urgent help just call 01453 800109 and ask for Andrea.

Failings in formwork safety leads to further injuries and fines

Formwork safety continues to be an area in which many sites could improve.  There are a range of courses out there which give useful qualification and skills in the management of formwork and falsework risk.  A good example of this would be the Temporary Works Supervisor Training Course (TWSTC) available from CITB.
For more information on this course see this link; TWSTC

Erector fell 3m after access scaffold board failed under load

Sager Construction Limited (SCL) and Shaun Dixon Services Ltd (SDSL) have been fined when an employee fell more than 3m when a scaffold board he was standing on failed.

Southwark Crown Court heard SCL had been appointed Principal Contractor under the CDM 2007 Regulations for the construction of a shopping centre and residential units.

On the 19 February 2015 the 64-year old employee of formwork contractor SDSL was installing a primary beam in the basement when he fell from the top of the work platform.  He  suffered fractures to both of his feet and deep cuts to his head and arms as a result.

Dangerous boards and poor working practices

On investigation the Health and Safety Executive found that operatives worked from boards which were in a poor condition. It was also revealed that particularly poor practices took place in relation to work at height

Sager Construction Limited pleaded guilty to breaching Regulation 22 of the Construction (Design and Management) Regulations 2007, and was fined £34,000 and ordered to pay costs of £6,577.

Shaun Dixon Services Ltd was also found guilty of breaching Regulation 13 of the Construction (Design and Management) Regulations 2007 at an earlier date.

The company has since entered liquidation but was fined £160,000 and ordered to pay costs of £15,119.

Speaking after the hearing HSE inspector Gabriella Dimitrov said:

“The worker is lucky to have not sustained more serious injuries as a result of this fall from height.

It is entirely foreseeable that accidents will occur where work at height is being carried out without suitable work platforms and other measures to prevent workers from falling.

HSE will take action to ensure that duty holders are held to account for any failings.”

Contact form

Please complete the form below and we promise to respond within 24 hrs. If you need more urgent help just call 01453 800109 and ask for Andrea.

Hand arm vibration (HAV) – are you really managing the risk?

All of us have our pet subjects.  Some of us do tend to bury our heads in the sand for areas in which we’re not as competent.  You may, if you are honest with yourself, have a hit list of subjects which you mean to ‘review’ at some stage.

Local IOSH groups or similar can be a really good place to start in tackling these issues.  Other professionals will have been there before and will have found out its really not as bad as you might think.

Once area we think you should look at afresh is controlling the risk from vibration.  We’ve been involved in assessments for many years now so if you need some help and advice just let us know.  If you’re still looking for that ‘good reason’ to make a start read the case below….

Company fined for failing to manage vibration risks

Newfield Fabrications Company, a manufacturer of steel components based in Cheshire, was fined £120,000 for failing to ensure that the risks to employees were adequately controlled.

Manchester and Salford Magistrates Court heard that in late 2015 the welder, who had worked at the company for several years, was given a job that involved a large amount of grinding and polishing.

After a few hours on the job, he began to experience numbness and tingling, commonly an indicator of exposure to high levels of vibration.  He asked to swap with another worker but he was told by his supervisor to carry on with the work.

A few weeks later, a 20 year old apprentice welder also began to suffer from vibration-related symptoms after using similar equipment.

An HSE investigation found that Newfield Fabrications failed to control employees’ exposure to hand arm vibration. The firm also failed to give its employees sufficient information, instruction and training on the effects of working with vibrating hand tools.

Newfield Fabrications pleaded guilty to breaching Regulations 6(1) and 8(1) of the Control of Vibration at Work Regulations.

According to the company’s accounts, it had a turnover of £7.7m in 2016 and made a pre-tax profit of £118,826.00 and so the £120,000.00 fine plus the £7241.00 costs is a significant sum for its Directors to find.

HSE inspector Helen Jones said:

“This is a case of the company failing to protect workers using vibrating tools. Exposure to hand arm vibration is a well-known risk which the company failed to adequately control.

“The company also failed to ensure workers were looked after when symptoms did arise leading to further exposure. This was wholly inadequate, and led to two employees suffering significant health effects.”

Contact form

Please complete the form below and we promise to respond within 24 hrs. If you need more urgent help just call 01453 800109 and ask for Andrea.

Focus on structural safety

Working in a safety role means that you come across a diverse range and issues.  We work with the whole range of construction site specialists and spotting risk is part of engaging in conversations with each stakeholder.

If, like us, you’re of the opinion that every day is a school day then this site is likely to hold information you’ll benefit from knowing; http://www.structural-safety.org

Every report sent in is treated in confidence and it provides a means to share information so that all of us benefit from risks spotted by others across our industry and across the world.

Take a look at the site but also review the latest newsletter here; July 2017 CROSS Newsletter No 47

To give a flavour of the information you’ll be able to access see the list below;

  • Polyethylene core cladding panels used on residential high-rise building;
  • Steel canopy collapse during building completion works;
  • Unacceptable quality of construction and lack of supervision on a block of flats;
  • Steel balconies fixed to precast hollowcore floor planks;
  • Near miss – spalled concrete falling from rear face of drilled hole 26 floors up;
  • Failure of fabricated access staging board;
  • Designer competency and missing rebar; and
  • Inability of roller shutter doors to meet the pressure specification for dominant openings.

If you need help and assistance with health and safety from the Principal Designer role under the CDM regulations through to specific help with your own safety management please do get in touch or call us on 01453 800100

Contact form

Please complete the form below and we promise to respond within 24 hrs. If you need more urgent help just call 01453 800109 and ask for Andrea.

Construction deaths hit a record low

HSEIt’s great to be able to report some good news and I’m happy to be able to call it that.  We all qualify each improvement with an immediate caveat of ‘but many others still suffered death or injury which could have been avoided.  Lets not be afraid to say well done to everyone which helped drive these accidents down.

Its a very hard task to reach further improvements and yes, we do still have some way to go and we will get there.  For everyone which has put their time and trouble and resources behind driving down these risks – well done.

Health and safety statistics updated for 2017

Provisional data released by the Health and Safety Executive (HSE) reveals that 133 workers were fatally injured between April 2013 and March 2014, compared with 150 in 2012/13.

The overall rate of fatal injury has now dropped to 0.44 per 100,000 workers, compared to 0.51 in 2012/13.

Judith Hackitt, the HSE Chair, commented;

“The release of the annual statistics always leads to mixed emotions. Sadness for the loss of 133 lives, and sympathy for their families, friends and workmates, but also a sense of encouragement that we continue to make progress in reducing the toll of suffering.

“Whilst these are only provisional figures, they confirm Britain’s performance in health and safety as world class. For the last eight years we have consistently recorded one of the lowest rates of fatal injuries to workers among the leading industrial nations in Europe.”

Minister of State for Health and Safety, Mike Penning, said

“Any death at work is a death too many. But these statistics show that workplaces are getting safer.

“The Health and Safety Executive do an excellent job in making sure each and every one of us can go out to do an honest day’s work in the knowledge that our safety is being taken seriously.”

The new figures also show the rate of fatal injuries in several key industrial sectors:

  • There were 42 fatal injuries to workers in construction, lower than the average figure of 46. The latest rate of fatal injury is 1.98 per 100, 000 workers, compared to a five-year average of 2.07.
  • There were 27 fatal injuries to workers in agriculture, lower than the average of 33 for the previous five years. The rate of fatal injury in 2013/14 is 8.77, compared to the five-year average rate of 9.89.
  • There were 4 fatal injuries to workers in waste and recycling, lower than the average count of 7 over the last five years. The latest rate of 3.33 deaths per 100, 000 compares to an average rate of 5.48

In the last five years, the number of fatal injuries has fallen overall from 179 in 2009, to 147, 175, 171 to 150 in 2013.

Based on the latest available data, from 2011, Britain continues to have the lowest rate of fatal injuries to workers among the five leading industrial nations in Europe – Germany, France, Spain and Italy for the eighth year. Across Great Britain:

  • 106 fatal injuries in England were recorded – a rate of 0.41 deaths per 100,000 workers, compared to an average of 134 deaths in the past five years and a decrease from the 119 deaths (and rate of 0.47) recorded in 2012/13
  • 20 fatal injuries in Scotland were recorded – a rate of 0.78 deaths per 100,000 workers, compared to an average of 21 deaths in the past five years and a decrease from the 23 deaths (and rate of 0.90) recorded in 2012/13
  • 7 fatal injuries in Wales were recorded – a rate of 0.52 deaths per 100,000 workers, compared to an average of 10 deaths in the past five years and a decrease from the 8 deaths (and rate of 0.61) recorded in 2012/13

HSE has also today released the latest number of deaths from mesothelioma, a cancer caused by exposure to asbestos. These show that 2,535 people died in 2012, which is an increased from 2,291 in 2011.

Judith Hackitt said

“The high numbers of deaths relating to mesothelioma are a reminder of historically poor standards of workplace health and safety, which decades later are causing thousands of painful, untimely deaths each year. While we now recognise and are better positioned to manage such health risks, these statistics are a stark reminder of the importance of keeping health standards in the workplace on a par with those we apply to safety.”

HSE is due to launch an asbestos campaign in Autumn 2014 that aims to help at-risk tradespeople, such as roofers and builders, work more safely with asbestos to protect themselves from harm.

Contact form

Please complete the form below and we promise to respond within 24 hrs. If you need more urgent help just call 01453 800109 and ask for Andrea.

Highly flammable liquids fire burns spray booth operator

We have to be truthful and admit that we sometimes carry out tasks which in hindsight we could have done with far less risk.  It could be driving to work or what we do at home at the weekend away from the eyes of our colleagues and managers.

The case below highlights how susceptible we are to complacency.  We work with items everyday which carry with them great risks but we rarely suffer consequences for taking shortcuts. That in turn leads to greater and greater risk taking until an accident finally occurs.  Read the case below to find out what happened in this instance.

A paint manufacturing company in Manchester has been fined for health and safety failings after a worker suffered burns while trying to clean the floor of a spray booth.

Manchester Crown Court heard how an employee of HMG Paints Ltd was using a highly flammable solvent to clean the floor of a spray booth on site, a job he had done several times since the spray booth was installed.

After complaints about how difficult it was to remove the dried paint he was allowed to purchase an industrial floor scrubber to carry out the task. On 18 November 2014 electric motor on the floor scrubber ignited the cloud of flammable vapour that had built up in the spray booth.

The employee was seriously injured, receiving 26% burns, and was treated at the specialist burns unit at Wythenshawe Hospital.

An investigation by the Health and Safety Executive (HSE) found that the planning for cleaning floors using solvent failed to recognise the hazards and level of risk associated with the use of highly flammable solvents to clean floors. The employee who was injured had not been trained to clean floors and was not adequately supervised when carrying out the cleaning activity.

HMG Paints Limited, of Collyhurst Road, Manchester, pleaded guilty to breaching Section 2 of the Health and Safety at Work Act 1974, and was fined £80,000 and ordered to pay costs of £39,669.40.

Speaking after the case HSE inspector David Myrtle said:

“This is a company that handles large quantities of flammable solvent, the hazards are well known and the company has a duty to control the risks arising from the hazards.

“It was custom and practice to clean floors using highly flammable solvents applied using a mop and bucket. In this instance the company failed to adequately control the risks and an employee was seriously injured.” [source HSE]

Contact form

Please complete the form below and we promise to respond within 24 hrs. If you need more urgent help just call 01453 800109 and ask for Andrea.

What’s the best way to move gas cylinders?

Moving gas cylinders in your workplace – the hazards

We see gas cylinders in use across the wide range of clients we visit.  Some will use cylinders to power their MHE (Materials Handling Equipment) and some will be using gases to complete welding and cutting operations as part of their production process.

We’ve written blogs in the past about cylinders and safety measures but not about their actual handling (see here for an accident linked to this post).

To lift or not to lift; that is the question

The key issue with cylinders and their movement relates to handling and lifting.  Many workplaces are equipped with various handling equipment and it’s tempting to use one of a number of means to lift cylinders.  It’s also quite tempting to manually handle cylinders into position when the distances aren’t too great.

The risks of lifting cylinders

We’ve seen in real life a number of situations where a high risk method has been used to move cylinders, check through the examples below and see if you recognise any of these from your past experience of perhaps even your own site;

  1. Manual handling by churning (rolling on the base);
    1. This is a valid method but what about tall and heavy cylinders and moving them through a cluttered and busy workplace? One drop can cause significant damage to the cylinder, or even the valve, creating a ballistic missile capable of passing through walls!  The is suitable for short movements of easily handled cylinders only (<5m).
  2. Lifting using fork lift truck attachments;
    1. This is fine if the cylinders are safely stored on a pallet or cradle but using attachments such as barrel clamps, scissor clamps or magnets – this can damage the cylinder walls with catastrophic consequences.
  3. Lifting using the valve shroud or valve itself;
    1. Lifting on the valve shroud can cause it to detach from the cylinder, it’s just not designed for a suspension lift.
    2. Lifting on the valve it certainly a very bad idea – again, it’s not designed for this and could lead to leaks, sudden failure and may of course slip from the lifting sling – this is the highest risk and must always be avoided.

What should you do?

In simple terms follow the guidance  issued by the BCGA, which you can download here; BCGA TIS 28

If you still have questions perhaps now is a good time to ask an experienced consultant from Outsource Safety to review your current procedures.  We can visit and carry out specific risk assessments or even a comprehensive Gap Analysis in line with the requirements of the internationally recognised Management Standard OHSAS18001, contact us for more information.

Contact form

Please complete the form below and we promise to respond within 24 hrs. If you need more urgent help just call 01453 800109 and ask for Andrea.