Failings in formwork safety leads to further injuries and fines

Formwork safety continues to be an area in which many sites could improve.  There are a range of courses out there which give useful qualification and skills in the management of formwork and falsework risk.  A good example of this would be the Temporary Works Supervisor Training Course (TWSTC) available from CITB.
For more information on this course see this link; TWSTC

Erector fell 3m after access scaffold board failed under load

Sager Construction Limited (SCL) and Shaun Dixon Services Ltd (SDSL) have been fined when an employee fell more than 3m when a scaffold board he was standing on failed.

Southwark Crown Court heard SCL had been appointed Principal Contractor under the CDM 2007 Regulations for the construction of a shopping centre and residential units.

On the 19 February 2015 the 64-year old employee of formwork contractor SDSL was installing a primary beam in the basement when he fell from the top of the work platform.  He  suffered fractures to both of his feet and deep cuts to his head and arms as a result.

Dangerous boards and poor working practices

On investigation the Health and Safety Executive found that operatives worked from boards which were in a poor condition. It was also revealed that particularly poor practices took place in relation to work at height

Sager Construction Limited pleaded guilty to breaching Regulation 22 of the Construction (Design and Management) Regulations 2007, and was fined £34,000 and ordered to pay costs of £6,577.

Shaun Dixon Services Ltd was also found guilty of breaching Regulation 13 of the Construction (Design and Management) Regulations 2007 at an earlier date.

The company has since entered liquidation but was fined £160,000 and ordered to pay costs of £15,119.

Speaking after the hearing HSE inspector Gabriella Dimitrov said:

“The worker is lucky to have not sustained more serious injuries as a result of this fall from height.

It is entirely foreseeable that accidents will occur where work at height is being carried out without suitable work platforms and other measures to prevent workers from falling.

HSE will take action to ensure that duty holders are held to account for any failings.”

Contact form

Please complete the form below and we promise to respond within 24 hrs. If you need more urgent help just call 01453 800109 and ask for Andrea.

Leave a Reply

Your email address will not be published. Required fields are marked *